Factory-direct-hardware Hansgrohe 10458 Axor Starck Instrukcja Użytkownika Strona 19

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 24
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 18
11
Remove the flush insert plug from the cold water
side of the rough. Install a hose bibb and a
hose. Turn on the water and allow the line to flush
thoroughly.
Repeat the flushing procedure on the hot water side.
Replace and tighten the plugs. Pressure test the
unit.
Install the plaster shields. Use a 5 mm Allen
wrench to tighten the screws.
Przeglądanie stron 18
1 2 ... 14 15 16 17 18 19 20 21 22 23 24

Komentarze do niniejszej Instrukcji

Brak uwag